Cisco Cisco Packet Data Interworking Function (PDIF)
Accounting Policy Configuration Mode Commands
trigger-type ▀
Command Line Interface Reference, StarOS Release 16 ▄
243
trigger-type
This command enables/disables the event triggers for Rf-Gy interaction.
Product
GGSN
HSGW
P-GW
S-GW
SAEGW
Privilege
Administrator
Mode
Exec > Global Configuration > Context Configuration > Accounting Policy Configuration
configure > context context_name > policy accounting policy_name
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-accounting-policy)#
Syntax
trigger-type { gy-sdf-time-limit { cache | immediate } | gy-sdf-unit-limit { cache |
immediate } | gy-sdf-volume-limit { cache | immediate } } +
immediate } | gy-sdf-volume-limit { cache | immediate } } +
{ default | no } trigger-type
default | no
The default behavior is to disable all the configured event triggers. The interims will be dropped if the event
triggers are received from Gy.
triggers are received from Gy.
gy-sdf-time-limit { cache | immediate }
Enables the SDF time-limit trigger for Rf-Gy interaction.
cache
: If this keyword option is configured then upon receipt of time-limit event trigger from Gy, the
container record will be cached for reporting in a future transaction.
immediate
: If this keyword option is configured then upon receipt of time-limit event trigger from Gy, Rf
will send out an interim record immediately.
gy-sdf-unit-limit { cache | immediate }
Enables the SDF unit-limit trigger for Rf-Gy interaction in Assume Positive scenario. Upon configuration of
the CLI command
the CLI command
trigger-type gy-sdf-unit-limit { cache | immediate }
, when the session
gets terminated during assume-positive case, ACR-Stop is sent with the container-level change-condition as
SERVICE-SPECIFIC-UNIT-LIMIT.
SERVICE-SPECIFIC-UNIT-LIMIT.
gy-sdf-volume-limit { cache | immediate }
Enables the SDF volume-limit trigger for Rf-Gy interaction.