Cisco Cisco Packet Data Interworking Function (PDIF)
Context Configuration Mode Commands N-R
▀ network-requested-pdp-context activate
▄ Command Line Interface Reference, StarOS Release 16
2560
network-requested-pdp-context activate
Configures the mobile station(s) (MSs) for which network initiated PDP contexts are supported.
Product
GGSN
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > Context Configuration
configure > context context_name
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-ctx)#
Syntax
network-requested-pdp-context activate address ip_address dst-context context_name imsi
imsi apn apn_name
imsi apn apn_name
no network-requested-pdp-context activate address ip_address dst-context context_name
no
Disables the system’s ability to accept network-requested PDP contexts on the specified interface.
ip_address
Specifies the static IP address of the MS n IPv4 dotted-decimal notation.
dst-context context_name
Specifies the name of the destination context configured on the system containing the static IP address pool in
which the MS’s IP address is configured.
which the MS’s IP address is configured.
context_name
is an alphanumeric string of 1 through 79
characters that is case sensitive.
imsi imsi
Specifies the International Mobile Subscriber Identity (IMSI) of the MS as a string of 1 through 15 numeric
characters
characters
apn apn_name
Specifies the Access Point Name (APN) that is passed to the SGSN by the system.
apn_name
is an
alphanumeric string of 1 through 63 characters that is case sensitive.
Usage
Use this command to specify the MS(s) for which network initiated PDP contexts are supported.
When a packet is received for an MS that does not currently have a PDP context established, the system
checks the configuration of this parameter to determine if the destination IP address specified in the packet is
specified by this parameter. If the address is not specified, then the system discards the packet. If the address
When a packet is received for an MS that does not currently have a PDP context established, the system
checks the configuration of this parameter to determine if the destination IP address specified in the packet is
specified by this parameter. If the address is not specified, then the system discards the packet. If the address