Cisco Cisco Packet Data Interworking Function (PDIF)
Context Configuration Mode Commands N-R
remote-server-list ▀
Command Line Interface Reference, StarOS Release 16 ▄
2663
remote-server-list
Creates or specifies the name of an existing remote server list for this context and enters the Remote Access List
Configuration Mode.
Configuration Mode.
Product
All
Privilege
Administrator
Mode
Exec > Global Configuration > Context Configuration
configure > context context_name
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-ctx)#
Syntax
remote-server-list name list_name
no remote-server-list name list_name
no
Removes the specified remote server list from the context.
list_name
Specifies the name of the remote server list. If
list_name
does not refer to an existing list, the new list is
created if resources allow.
list_name
is an alphanumeric string of 1 through 31 characters.
Usage
Enter the Remote Server List Configuration Mode for an existing list or for a newly defined list. This
command is also used to remove an existing remote access list.
A maximum of 256 services (regardless of type) can be configured per system.
Entering this command results in the following prompt:
command is also used to remove an existing remote access list.
A maximum of 256 services (regardless of type) can be configured per system.
Entering this command results in the following prompt:
[context_name]hostname(config-remote-server-list)#
Remote Server List Configuration Mode commands are defined in the remote Server List Configuration
Mode Commands chapter.
Mode Commands chapter.
Example
The following command enters the Remote Server List Configuration Mode for the list named
remote_list_1
:
remote-server-list remote_list_1
The following command will remove
remote_list_1
from the system:
no remote-server-list remote_list_1