Cisco Cisco Packet Data Interworking Function (PDIF)
Context Configuration Mode Commands S-Z
threshold ip-pool-free ▀
Command Line Interface Reference, StarOS Release 16 ▄
2701
threshold ip-pool-free
Sets an alarm or alert based on the percentage of IP addresses that are unassigned in an IP pool. This command affects
all IP pools in the current context.
all IP pools in the current context.
Product
All
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > Context Configuration
configure > context context_name
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-ctx)#
Syntax
threshold ip-pool-free low_thresh [ clear high_thresh ]
default threshold ip-pool-free
default
Configures the default setting.
low_thresh
Sets the low threshold percentage of addresses available in an IP pool that must be met or exceeded within
the polling interval to generate an alert or alarm. It can be configured as an integer between 0 and 100.
Default:0
the polling interval to generate an alert or alarm. It can be configured as an integer between 0 and 100.
Default:0
clear high_thresh
Sets the high threshold percentage of addresses available in an IP pool that maintains a previously generated
alarm condition. If the utilization percentage rises above the high threshold within the polling interval, a clear
alarm will be generated. It may be configured as an integer between 0 and 100. Default: 0
alarm condition. If the utilization percentage rises above the high threshold within the polling interval, a clear
alarm will be generated. It may be configured as an integer between 0 and 100. Default: 0
Important:
This value is ignored for the Alert model. In addition, if this value is not configured for the Alarm
model, the system assumes it is identical to the low threshold.
Usage
Use this command to set an alert or an alarm when the number of unassigned IP addresses in any pool is
equal to or less than a specified percentage of the total number of addresses in the pool.
Alerts or alarms are triggered for percentage of IP address pool free based on the following rules:
equal to or less than a specified percentage of the total number of addresses in the pool.
Alerts or alarms are triggered for percentage of IP address pool free based on the following rules:
Enter Condition: Actual percentage of IP addresses free per pool < Low Threshold
Clear Condition: Actual percentage of IP addresses free per pool > High Threshold