Cisco Cisco Packet Data Interworking Function (PDIF)
CSCF ACL Configuration Mode Commands
▀ deny
▄ Command Line Interface Reference, StarOS Release 16
2964
deny
Configures the system to deny subscriber sessions based on criteria matching the received packet.
Product
SCM
Privilege
Administrator
Mode
Exec > Global Configuration > Context Configuration > CSCF ACL Configuration
configure > context context_name > cscf acl { default | name list_name }
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-cscf-acl)#
Syntax
deny { any | destination aor aor | log { any | destination aor aor | source { address
ip_address | aor aor } | subscriber-capability capability_type | user-agent device-type
device_type } | source { address ip_address | aor aor } | subscriber-capability
capability_type | user-agent device-type device_type } +
ip_address | aor aor } | subscriber-capability capability_type | user-agent device-type
device_type } | source { address ip_address | aor aor } | subscriber-capability
capability_type | user-agent device-type device_type } +
no deny { any | destination aor aor | source { address ip_address | aor aor } |
subscriber-capability capability_type }
subscriber-capability capability_type }
any
Filters all CSCF sessions.
destination aor aor
Filters sessions based on the destination AoR.
aor
must be an existing AoR from 1 to 79 characters in length.
Important:
AoR regular expressions are supported. Refer to the SCM Engineering Rules Appendix in the
Session Control Manager Administration Guide for more information about regular expressions.
log { any | destination aor aor | source { address ip_address | aor aor } |
subscriber-capability { capability_type } | user-agent device-type device_type }
subscriber-capability { capability_type } | user-agent device-type device_type }
Enables logging for CSCF sessions meeting the criteria specified in the ACL. The logs can be viewed by
executing the
executing the
logging filter active facility acl-log
command in the Exec mode.
Specifies the criteria that packets will be compared against. The following criteria are supported:
any
destination aor
aor
source address
ip_address
source aor
aor
subscriber-capability capability_type