Cisco Cisco Packet Data Interworking Function (PDIF)
CSCF Peer Server Monitoring Configuration Mode Commands
ims-capable ▀
Command Line Interface Reference, StarOS Release 16 ▄
3083
ims-capable
Indicates whether the peer server belongs to a 3GPP/IMS network or a non-IMS network such as the Internet. This
command is used to determine at the S-CSCF whether SIP signaling inter-working is needed when the calls are
forwarded to external networks.
command is used to determine at the S-CSCF whether SIP signaling inter-working is needed when the calls are
forwarded to external networks.
Product
SCM (S-CSCF)
Privilege
Administrator
Mode
Exec > Global Configuration > Context Configuration > CSCF Peer Servers Configuration > Server Configuration
configure > context context_name > cscf peer-servers server_name type { bgcf | ibcf |
icscf | mgcf | mrcf | pcscf | scscf | sip-as } > server server_name { address ip_address
| domain domain_name )
icscf | mgcf | mrcf | pcscf | scscf | sip-as } > server server_name { address ip_address
| domain domain_name )
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-server_name-peer-server)#
Syntax
[ no ] ims-capable
no
Removes the identification of “IMS capable” from the selected peer server.
Usage
Use this command to identify a peer server as IMS capable allowing the S-CSCF to use SIP signalling inter-
working when forwarding calls to non-IMS capable networks.
working when forwarding calls to non-IMS capable networks.