Cisco Cisco Packet Data Interworking Function (PDIF)
CSCF Service Configuration Mode Commands
▀ allow-dereg
▄ Command Line Interface Reference, StarOS Release 16
3180
allow-dereg
Allows the CSCF to send de-registration requests. Feature is disabled by default.
Product
SCM
Privilege
Administrator
Mode
Exec > Global Configuration > Context Configuration > CSCF Service Configuration
configure > context context_name > cscf service service_name
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-cscf-service)#
Syntax
[ no ] allow-dereg
no
Disables the feature.
Usage
Use this command to allow the CSCF service to send de-registration requests.
If the UE stops sending keepalive packets, which ends the connection between the UE and the proxy, UE
information is cleared from the Proxy-CSCF (P-CSCF) or Access Border Gateway (A-BG). If de-registration
requests are enabled, any UE-related information that is shared with the Serving-CSCF (S-CSCF) will also be
cleared.
If the UE stops sending keepalive packets, which ends the connection between the UE and the proxy, UE
information is cleared from the Proxy-CSCF (P-CSCF) or Access Border Gateway (A-BG). If de-registration
requests are enabled, any UE-related information that is shared with the Serving-CSCF (S-CSCF) will also be
cleared.