Cisco Cisco Packet Data Interworking Function (PDIF)
Diameter Endpoint Configuration Mode Commands
dpa-timeout ▀
Command Line Interface Reference, StarOS Release 16 ▄
3423
dpa-timeout
This command configures the Disconnect-Peer-Answer (DPA) message timeout duration for Diameter sessions.
Product
All
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > Context Configuration > Diameter Endpoint Configuration
configure > context context_name > diameter endpoint endpoint_name
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-ctx-diameter)#
Syntax
dpa-timeout timeout
default dpa-timeout
default
Configures this command with the default setting.
Default: 30 seconds
Default: 30 seconds
timeout
Specifies the DPA message timeout duration (in seconds) as an integer from 1 through 60.
Usage
Use this command to set the timer for DPA message timeout during Diameter connection session. This makes
the system wait for this duration for DPA message.
the system wait for this duration for DPA message.
Example
The following command sets the Diameter DPA timeout to
16
seconds:
dpa-timeout 16