Cisco Cisco Packet Data Interworking Function (PDIF)
EIR Profile Configuration Mode Commands
▀ check-imei-every-n-events
▄ Command Line Interface Reference, StarOS Release 16
3568
check-imei-every-n-events
Configures the frequency that ‘check IMEI’ is performed.
Product
SGSN
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > SGSN Global Configuration > EIR Profile Configuration
configure > sgsn-global > eir-profile eir_profile_name
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-eir-profile-eir_profile_name)#
Syntax
check-imei-every-n-events check_frequency
no check-imei-every-n-events
no
Removes the
check-imei-every-n-events
definition from the EIR profile configuration.
check_frequency
The frequency must be an integer from 1 to 15.
When a value is configured, the SGSN skips sending the ‘check IMEI’ message for the first N-1 where
IMDI/IMEISV is received.
When a value is configured, the SGSN skips sending the ‘check IMEI’ message for the first N-1 where
IMDI/IMEISV is received.
Usage
If a value is not defined for this parameter, then by default, the SGSN sends a ‘check IMEI’ message for
every event.
every event.
Example
Use a command similar to the following to remove the check frequency configuration from the EIR profile:
no check-imei-every-n-events