Cisco Cisco Packet Data Interworking Function (PDIF)
Exec Mode Commands (A-C)
clock set ▀
Command Line Interface Reference, StarOS Release 16 ▄
3903
clock set
Sets the system time.
Product
All
Privilege
Security Administrator, Administrator
Mode
Exec
The following prompt is displayed in the Exec mode:
[local]host_name#
Syntax
clock set date_time
date_time
Specifies the date and time to set the system clock in the format YYYY:MM:DD:HH:mm or
YYYY:MM:DD:HH:mm:ss. Where:
YYYY:MM:DD:HH:mm:ss. Where:
YYYY = 4-digit year
MM = 2-digit month in the range 01 through 12
DD = 2-digit day in the range 01 through 31
HH = 2-digit hour in the range 00 through 23
mm = 2-digit minute in the range 00 through 59
ss = 2-digit second in the range 00 through 59
Usage
Set the clock to adjust the system clock for such things as timing drift, day-light savings adjustment, etc. New
settings are immediately applied to all CPUs in the system.
settings are immediately applied to all CPUs in the system.
Important:
This command should only be used if there is no NTP server enabled for any context. If NTP is
running on the system, this command returns a failure.
Example
The following commands set the system clock where one sets the exact second as well.
clock set 2011:08:05:02:30
clock set 2011:08:05:02:31:30