Cisco Cisco Packet Data Interworking Function (PDIF)
Exec Mode Commands (D-S)
debug ipv6 ospf event ▀
Command Line Interface Reference, StarOS Release 16 ▄
3943
debug ipv6 ospf event
Enables or disables debugging of OSPFv3 protocol events. If logging is enabled, results are sent to the logging system.
If no keywords are specified, all events are enabled for debugging.
If no keywords are specified, all events are enabled for debugging.
Product
PDSN
HA
GGSN
Privilege
Security Administrator, Administrator, Operator
Mode
Exec
The following prompt is displayed in the Exec mode:
[local]host_name#
Syntax
[ no ] debug ipv6 ospf event [ abr | asbr | os | router ]
no
Disables debugging the specified OSPFv3 event. If no keywords are specified, all events are disabled.
abr
Enables debugging of Area Border Router (ABR) events.
asbr
Enables debugging of Autonomous System BOundary Router (ASBR) events.
os
Enables debugging of operating system (OS) events.
router
Enables debugging of router events.
Usage
Use this command to output debug information for OSPFv3 events.
Example
To enable all event debug information, enter the following command;
debug ipv6 ospf event
To disable all event debug information, enter the following command;
no debug ipv6 ospf event