Cisco Cisco Packet Data Interworking Function (PDIF)
Exec Mode Commands (D-S)
▀ sgs vlr-failure
▄ Command Line Interface Reference, StarOS Release 16
4094
sgs vlr-failure
This command configures the MME to monitor all VLRs and perform a controlled release (detach) of affected UEs
when any VLR becomes unavailable.
when any VLR becomes unavailable.
Product
MME
Privilege
Security Administrator, Administrator
Mode
Exec
The following prompt is displayed in the Exec mode:
[local]host_name#
Syntax
[no] sgs vlr-failure sgs-service sgs_svc_name duration minutes backoff-timer seconds [ -
noconfirm ]
noconfirm ]
no
Resets the command to its default setting of disabled.
sgs-service sgs_svc_name
Specifies the SGs service to which the VLR belongs.
sgs_svc_name
specifies the name of a pre-configured SGs service.
duration minutes
Specifies the amount of time in minutes during which all qualifying UEs will be detached.
The MME splits this duration into n intervals, 5 seconds apart. A maximum of 50 subscribers are processed
per interval. For example, a setting of 2 minutes with 100 subscribers would result in the MME processing all
subscribers in the first 2 intervals (10) seconds. Any subscribers remaining at the expiry of the duration will
not be processed.
The MME splits this duration into n intervals, 5 seconds apart. A maximum of 50 subscribers are processed
per interval. For example, a setting of 2 minutes with 100 subscribers would result in the MME processing all
subscribers in the first 2 intervals (10) seconds. Any subscribers remaining at the expiry of the duration will
not be processed.
minutes
must be an integer from 1 through 3000.
backoff-timer seconds
Specifies the period of time the MME will wait following the detection of a VLR condition before starting the
controlled release of affected UEs.
controlled release of affected UEs.
seconds
must be an integer from 1 to 3000.
-noconfirm
Indicates that the command is to execute without additional prompt and confirmation from the user.