Cisco Cisco Packet Data Interworking Function (PDIF)
Exec Mode Commands (T-Z)
test mobile tunnel ▀
Command Line Interface Reference, StarOS Release 16 ▄
4131
test mobile tunnel
Tests for the existence of a specified mobile tunnel.
Product
All
Privilege
Security Administrator, Administrator, Operator
Mode
Exec
The following prompt is displayed in the Exec mode:
[local]host_name#
Syntax
test mobile tunnel { callid call_id | imsi imsi_value | ipaddr ip_address | msid msid_num
| nai nai_value }
| nai nai_value }
callid
call_id
Specifies the exact call instance ID which is to have trace data logged.as a 4-byte hexadecimal number.
imsi
imsi_value
Specifies the International Mobile Subscriber Identity (IMSI) of the subscriber session to be monitored an
integer from 1 though 15 characters.
integer from 1 though 15 characters.
ipaddr
ip_address
Specifies the IP address of the subscriber session to be monitored in IPv4 dotted-decimal or IPv6 colon-
separated-hexadecimal notation.
separated-hexadecimal notation.
msid
msid_num
Specifies the mobile subscriber identification number to be monitored as 7 to 16 digits of an IMSI, MIN, or
RMI.
RMI.
nai
nai_value
Specifies the mobile session Network Access Identifier as an alphanumeric string of 1 through 256
characters. The NAI is the user identity submitted by the client during network access authentication.
characters. The NAI is the user identity submitted by the client during network access authentication.
Usage
Use this command to test a specified mobile tunnel.
Caution:
The use of test commands could adversely affect the operation of your system. It is recommended that
they only be used under the guidance and supervision of qualified support representative.
Example