Cisco Cisco Packet Data Interworking Function (PDIF)
Exec Mode show Commands (A-C)
show cs-network counters ▀
Command Line Interface Reference, StarOS Release 16 ▄
4391
show cs-network counters
Displays the session counter information for an HNB-CS Network associated with Home-NodeB Gateway (HNB-GW)
services configured and running on a system.
services configured and running on a system.
Product
HNB-GW
Privilege
Inspector
Mode
Exec
The following prompt is displayed in the Exec mode:
[local]host_name#
Syntax
show cs-network counters [ name cs_svc_name [ msc msc_point_code ] ] [ | { grep
grep_options | more } ]
grep_options | more } ]
name cs_svc_name
Filters the counter display based on an existing HNB-CS Network service name associated with an HNB-GW
service running on system.
service running on system.
cs_svc_name
is an alphanumeric string of 1 through 63 characters.
msc msc_point_code
Filters the counter display filtered on the basis of MSC address provided in the SS7 point code that is
connected to a particular HNB-CS Network service.
connected to a particular HNB-CS Network service.
msc_point_code
must be the address of an MSC in
SS7 point code notation.
| { grep grep_options | more }
Pipes (sends) the output of this command to the specified command. You must specify a command to which
the output of this command will be sent.
For details on the usage of the
the output of this command will be sent.
For details on the usage of the
grep
and
more
commands, refer to the Regulating a Command’s Output
section in Command Line Interface Overview chapter.
Usage
Use this command to view the session counter information for HNB-CS Network services configured and
MSCs connected on a system.
MSCs connected on a system.
Example
The following command displays the counters for the HNB-CS Network service named
hnb_cs_svc1
:
show cs-network counters name hnb_cs_svc1
Important:
Output descriptions for commands are available in the Statistics and Counters Reference.