Cisco Cisco Packet Data Interworking Function (PDIF)
Exec Mode show Commands (D-G)
▀ show gtpu-service
▄ Command Line Interface Reference, StarOS Release 16
4502
show gtpu-service
Displays configuration information for GPRS Tunneling Protocol user plane (GTP-U) services on this system.
Product
ePDG
P-GW
SAEGW
S-GW
Privilege
Inspector
Mode
Exec
The following prompt is displayed in the Exec mode:
[local]host_name#
Syntax
show gtpu-service { all | name service_name } [ | { grep grep_options | more } ]
all
Displays configuration information for all GTP-U services configured on this system.
name service_name
Displays configuration information for an existing GTP-U service specified an alphanumeric string of 1
through 63 characters.
through 63 characters.
| { grep grep_options | more }
Pipes (sends) the output of this command to a specified command. You must specify a command to which the
output of this command will be sent.
For details on the usage of the
output of this command will be sent.
For details on the usage of the
grep
and
more
commands, refer to the Regulating a Command’s Output
section of the Command Line Interface Reference Guide.
Usage
Use this command to view configuration information for GTP-U services on this system.
Example
The following command displays service statistics for the GTP-U service named
gtpu1
:
show gtpu-service name gtpu1