Cisco Cisco Packet Data Interworking Function (PDIF)
Exec Mode show Commands (H-L)
show ipsg service ▀
Command Line Interface Reference, StarOS Release 16 ▄
4569
show ipsg service
Displays IP Service Gateway (IPSG) service information.
Product
eWAG
IPSG
Privilege
Security Administrator, Administrator, Operator, Inspector
Mode
Exec
The following prompt is displayed in the Exec mode:
[local]host_name#
Syntax
show ipsg service { all [ [ verbose ] counters ] | name ipsg_service_name [ counters ] }
[ | { grep grep_options | more } ]
[ | { grep grep_options | more } ]
all [ [ verbose ] counters ]
Displays information for all IPSG service(s) configured on the system.
verbose
: Specifies to display detailed information.
counters
: Specifies to display counters associated with IPSG services.
name ipsg_service_name [ counters ]
Displays information for the specified IPSG service.
name ipsg_service_name
: Specifies name of the IPSG service.
ipsg_service_name
must be an
alphanumeric string of 1 through 63 characters.
counters
: Specifies to display counters associated with IPSG services.
| { grep grep_options | more }
Specifies to pipe (send) the output of this command to the specified command. You must specify a command
to which the output of this command should be sent.
For details on the usage of
to which the output of this command should be sent.
For details on the usage of
grep
and
more
, refer to the Regulating a Command’s Output section of the
Command Line Interface Overview chapter.
Usage
Use this command to view information for all or a specific IPSG service.
Example
The following command displays information for all IPSG services configured on the system:
show ipsg service all
Important:
Output descriptions for commands are available in the Statistics and Counters Reference.