Cisco Cisco Packet Data Interworking Function (PDIF)
ACS Configuration Mode Commands
fair-usage threshold-percent ▀
Command Line Interface Reference, StarOS Release 16 ▄
459
fair-usage threshold-percent
This command allows you to configure the usage threshold to start Fair Usage monitoring.
Product
ACS
ADC
CF
PSF
NAT
Privilege
Security Administrator, Administrator
Mode
Exec > ACS Configuration
active-charging service service_name
Entering the above command sequence results in the following prompt:
[local]host_name(config-acs)#
Syntax
fair-usage threshold-percent usage_threshold
default fair-usage threshold-percent
default
Configures this command with its default setting.
Default: 50 percent
Default: 50 percent
usage_threshold
Specifies the threshold to start Fair Usage monitoring. Until the credit usage hits this threshold, all session
resource allocation is allowed. On crossing this threshold, any new resource allocation request is evaluated
before being allowed or denied.
resource allocation is allowed. On crossing this threshold, any new resource allocation request is evaluated
before being allowed or denied.
usage_threshold
is a percentage value, and must be an integer from 1 through 100.
Usage
Use this command to configure the threshold to enable the Fair Usage feature, which enables SessMgr
instance-level load balancing for in-line service features, and resource usage control for subscribers. For
additional information, refer to the feature description in the Enhanced Charging Service Administration
Guide.
instance-level load balancing for in-line service features, and resource usage control for subscribers. For
additional information, refer to the feature description in the Enhanced Charging Service Administration
Guide.
Example
The following command enables the Fair Usage feature, and configures the session resource usage threshold
to start Fair Usage monitoring to 75%:
to start Fair Usage monitoring to 75%:
fair-usage threshold-percent 75