Cisco Cisco Packet Data Interworking Function (PDIF)
Exec Mode show Commands (H-L)
▀ show llc status
▄ Command Line Interface Reference, StarOS Release 16
4606
show llc status
Displays status information for the GPRS logical link-control (LLC) layer.
Product
SGSN
Privilege
Inspector
Mode
Exec
The following prompt is displayed in the Exec mode:
[local]host_name#
Syntax
show llc status gprs-service srvc_name sessmgr instance instance { dlci ms-id ms_id sapi
sapid | lsap sapid sapid | ms ms_id | usap sapid sapid [ | { grep grep_options | more } ]
sapid | lsap sapid sapid | ms ms_id | usap sapid sapid [ | { grep grep_options | more } ]
gprs-service srvc_name
Displays the LLC layer status for an existing GPRS service specified as an alphanumeric string of 1 through
63 characters.
63 characters.
sessmgr instance instance
Displays the LLC status for a session manager instance specified as an integer. The range varies depending
upon the release:
upon the release:
for releases prior to 14.0, the range is from 1 to 4294967295.
for releases 14.0 and later, the range is from 1 to 384.
dlci ms-id ms_id [ sapi sapid ]
Displays the LLC status for a specific data link connection identifier (DLCI) between the LLC and the mobile
station (MS).
station (MS).
ms_id
must be an integer from 0 to 65536 that identifies the DLCI interface connecting to a
specific MS.
sapi
: Filters the display of the LLC status information to focus on a specific service access point interface
(SAPI) within the specified DLCI specified as.an integer from 1 to 11
lsap sapid
Refines the display of the LLC status to focus on a specific lower service access point interface (LSAP)
specified as an integer from 0 to 65536.
specified as an integer from 0 to 65536.
ms-id ms_id
Displays the LLC status for a connected MS specified as an integer from 0 to 65536.
usap sapid
Refines the display of the LLC statistics to focus on a specific upper service access point interface (USAP)
specified as an integer from 0 to 65536.
specified as an integer from 0 to 65536.