Cisco Cisco Packet Data Interworking Function (PDIF)
Exec Mode show Commands (H-L)
▀ show lns-service
▄ Command Line Interface Reference, StarOS Release 16
4610
show lns-service
Displays the information for all L2TP Network Server (LNS) services or for a particular LNS service.
Product
PDSN
HA
GGSN
LNS
Privilege
Security Administrator, Administrator, Operator, Inspector
Mode
Exec
The following prompt is displayed in the Exec mode:
[local]host_name#
Syntax
show lns-service { all | name service_name } [ | { grep grep_options | more } ]
all
Display information for all LNS services.
name
service_name
Displays information only for an existing LNS service specified as an alphanumeric string of 1 through 63
characters.
characters.
| { grep
grep_options
| more }
Pipes (sends) the output of this command to the specified command. You must specify a command to which
the output of this command will be sent.
For details on the usage of
the output of this command will be sent.
For details on the usage of
grep
and
more
, refer to the Regulating a Command’s Output section of the
Command Line Interface Overview chapter.
Usage
Use this command to list information for LNS services configured on this system.
Example
The following commands display information for all LNS services and the LNS service named
lns1
,
respectively.
show lns-service all
show lns-service name lns1