Cisco Cisco Packet Data Interworking Function (PDIF)
FA Service Configuration Mode Commands
authentication mn-aaa ▀
Command Line Interface Reference, StarOS Release 16 ▄
4913
authentication mn-aaa
Specifies how the system handles authentication for mobile node re-registrations.
Product
PDSN
ASN-GW
GGSN
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > Context Configuration > FA Service Configuration
configure > context context_name > fa-service service_name
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-fa-service)#
Syntax
authentication mn-aaa { always | ignore-after-handoff | init-reg | init-reg-except-
handoff | renew-and-dereg-noauth | renew-reg-noauth } [ optimize-retries ]
handoff | renew-and-dereg-noauth | renew-reg-noauth } [ optimize-retries ]
always
Specifies that the FA service performs authentication each time a mobile node registers. This is the default
setting.
setting.
ignore-after-handoff
MN-AAA authentication is not done at the FA for a handoff Access Gateway (AGW).
init-reg
MN-AAA and MN-FAC extensions are required only in initialization RRQ.
init-reg-except-handoff
MN-AAA and MN-FAC extensions are not required in initialization RRQ after inter-Access Gateway
(AGW) handoff.
(AGW) handoff.
renew-and-dereg-noauth
Specifies that the FA service does not perform authentication for mobile node re-registration or deregistration
authorization requests. Initial registration is handled normally.
authorization requests. Initial registration is handled normally.
renew-reg-noauth
Specifies that the FA service does not perform authentication for mobile node re-registrations. Initial
registration and de-registration are handled normally.
registration and de-registration are handled normally.