Cisco Cisco Packet Data Interworking Function (PDIF)
GGSN Service Configuration Mode Commands
▀ default
▄ Command Line Interface Reference, StarOS Release 16
5080
default
Sets/restores the default value assigned for the specified parameter.
Product
GGSN
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > Context Configuration > GGSN Service Configuration
configure > context context_name > ggsn-service service_name
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-ggsn-service)#
Syntax
[ default ] { cc { behavior | profile index } | echo-interval | gtpu echo-interval | gtpu
reorder { context | sequence-numbers | timeout } | guard-interval | ip { local-port gtpc-
v1 | qos-dscp } | max-retransmissions | plmn { unlisted-sgsn } | setup-timeout | timeout
}
reorder { context | sequence-numbers | timeout } | guard-interval | ip { local-port gtpc-
v1 | qos-dscp } | max-retransmissions | plmn { unlisted-sgsn } | setup-timeout | timeout
}
cc { behavior | profile
index
}
Restores the GGSN’s charging characteristics parameters to the following default settings:
behavior: Restores all behavior parameters to their default values of 0 (disabled).
profile: For the specified index, the following defaults are applied:
buckets: 4
interval: Disabled
volume: Disabled
sgsns: 4
tariff-time: Disabled
echo-interval
Restores the GTP echo-interval parameter to its default setting of 60.
gtpu echo-interval
Restores the GTPU echo-interval parameter to its default setting of 60.
gtpu reorder { context | sequence-numbers | timeout }
Restores the gtpu reordering parameters to the following default settings:
gtpu reorder context: Disabled
gtpu reorder sequence-numbers: Disabled
gtpu reorder timeout: 100 milliseconds