Cisco Cisco Packet Data Interworking Function (PDIF)
Global Configuration Mode Commands (A-K)
boot interface ▀
Command Line Interface Reference, StarOS Release 16 ▄
5155
boot interface
Configures Ethernet network interfaces for obtaining a system software image during the system boot process.
Product
All
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration
configure
Entering the above command sequence results in the following prompt:
[local]host_name(config)#
Syntax
Releases prior to 12.2:
boot interface { spio-eth1 | spio-eth2 } [ medium { auto | speed
medium_speed duplex medium_duplex } [ media medium_media ] ]no boot
interface
medium_speed duplex medium_duplex } [ media medium_media ] ]no boot
interface
Releases after 12.2:
boot interface { local-eth1 | local-eth2 } [ medium { auto | speed
medium_speed duplex medium_duplex } [ media medium_media ] ]no boot
interface
medium_speed duplex medium_duplex } [ media medium_media ] ]no boot
interface
no
Removes the boot interface configuration from the boot.sys file. Only files from the local file system can be
loaded.
loaded.
spio-eth1
|
spio-eth2
Specifies the network interface to be configured where
spio-eth1
is the primary interface on the SPIO (slot
24 interface 1 or slot 25 interface 1) and
spio-eth2
is the secondary interface on the SPIO (slot 24 interface
2 or slot 25 interface 2). The interfaces are either RJ-45 ifor speeds of 10, 100, or 1000 megabits per second
(Mbps), or SFP for the optical Gigabit (1000 Mbps).
(Mbps), or SFP for the optical Gigabit (1000 Mbps).
local-eth1
|
local-eth2
Specifies the network interface to be configured where
local-eth1
is the primary ethernet interface and
local-eth2
is the secondary ethernet interface.
For the ASR 5000, the primary is interface 1 on the SPIO and the secondary is interface 2 on the SPIO. The
interfaces are either RJ-45 ifor speeds of 10, 100, or 1000 megabits per second (Mbps), or SFP for optical
Gigabit (1000 Mbps).
For the ASR 5500, the primary is port 1 (1000Base-T) on the MIO and the secondary interface is port 2
(1000Base-T) on the MIO.
interfaces are either RJ-45 ifor speeds of 10, 100, or 1000 megabits per second (Mbps), or SFP for optical
Gigabit (1000 Mbps).
For the ASR 5500, the primary is port 1 (1000Base-T) on the MIO and the secondary interface is port 2
(1000Base-T) on the MIO.