Cisco Cisco Packet Data Interworking Function (PDIF)
Global Configuration Mode Commands (L-S)
logging disable ▀
Command Line Interface Reference, StarOS Release 16 ▄
5305
logging disable
Enables/disables the logging of the specified event ID or range of IDs.
Product
All
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration
configure
Entering the above command sequence results in the following prompt:
[local]host_name(config)#
Syntax
logging disable eventid id [ to to_id ]
no logging disable eventid id [ to to_id ]
no
Indicates the event IDs specified are to be enabled for logging.
eventid
id
Specifies the event for which no logging is to occur.
In 14.1 and earlier releases,
In 14.1 and earlier releases,
id
is an integer from 1 through 202699.
In 15.0 and later releases,
id
is an integer from 1 through 204999.
to
to_id
Specifies the end ID of the events when a range of event ID is to be disabled from being logged.
to_id
must
be an integer from 1 through 204999. The
to_id
must be equal to or larger than the
id
specified.
Usage
Disable common events which may occur with a normal frequency are not of interest in monitoring the
system for troubles.
system for troubles.
Example
The following commands disables the logging of event ID 4580 and the range of events from 4500 through
4599, respectively.
4599, respectively.
logging disable eventid 4580 4580
logging disable eventid 4500 to 4599
The following enables the subset of disabled event IDs:
no logging disable eventid 4500 to 4549