Cisco Cisco Packet Data Interworking Function (PDIF)
Global Configuration Mode Commands (L-S)
quality-of-service-profile ▀
Command Line Interface Reference, StarOS Release 16 ▄
5355
quality-of-service-profile
This command allows you to create a Quality of Service profile and enter the Quality of Service Profile Configuration
Mode. This mode is used to configure Quality of Service parameters.
Mode. This mode is used to configure Quality of Service parameters.
Product
SGSN
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration
configure
Entering the above command sequence results in the following prompt:
[local]host_name(config)#
Syntax
quality-of-service-profile qos_ profile_ name [ -noconfirm ]
no quality-of-service-profile qos_ profile_ name
no
Removes the specified Quality of Service profile.
noconfirm
Do not prompt for additional verification when executing this command.
qos_ profile_ name
The name of the Quality of Service profile to create or remove, it must be an alphanumeric string of 1
through 64 characters.
through 64 characters.
Usage
Use this command to enter the Quality of Service Profile Configuration mode. Entering this command results
in the following prompt:
in the following prompt:
[context_name]host(config-quality-of-service-profile- <qos_profile_name>)#
Quality of Service Profile Configuration Mode commands are defined in the Quality of Service Profile
Configuration Mode Commands chapter.
Configuration Mode Commands chapter.
Example
Enter the following command to create a Quality of Service profile named
test
:
quality-of-service-profile test