Cisco Cisco Packet Data Interworking Function (PDIF)
Global Configuration Mode Commands (L-S)
▀ ran-peer-map
▄ Command Line Interface Reference, StarOS Release 16
5368
ran-peer-map
Creates a Radio Access Network (RAN) Peer Map and enters the RAN Peer Map Configuration Mode.
Product
ASN-GW
PHSGW
Privilege
Administrator
Mode
Exec > Global Configuration
configure
Entering the above command sequence results in the following prompt:
[local]host_name(config)#
Syntax
[ no ] ran-peer-map name [ -noconfirm ]
no
Removes the RAN Peer Map from the system.
name
Specifies the name of the RAN Peer Map.
name
must be an alphanumeric string of 1 through 31 characters.
Usage
Use this command to create a new RAN Peer Map or edit an existing one. RAN peer maps reconcile base
station MAC addresses received in R6 protocol messages to the base station’s IP address.
Entering this command results in the following prompt:
station MAC addresses received in R6 protocol messages to the base station’s IP address.
Entering this command results in the following prompt:
[context_name]hostname(config-ran-peer-map)#
RAN Peer Map Configuration Mode commands are defined in the ASN RAN Peer Map Configuration Mode
Commands chapter in this guide.
Commands chapter in this guide.
Example
The following command creates a RAN peer map named
ran12
:
ran-peer-map ran12