Cisco Cisco Packet Data Interworking Function (PDIF)
Global Configuration Mode Commands (L-S)
sccp-network ▀
Command Line Interface Reference, StarOS Release 16 ▄
5387
sccp-network
This command creates or removes a Signaling Connection Control Part (SCCP) network instance which is used to
define the SS7 end-to-end routing in a UMTS network. As well, this command enters the SCCP network configuration
mode. The SGSN supports up to 12 SCCP network instances at one time.
define the SS7 end-to-end routing in a UMTS network. As well, this command enters the SCCP network configuration
mode. The SGSN supports up to 12 SCCP network instances at one time.
Product
SGSN
HNB-GW
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration
configure
Entering the above command sequence results in the following prompt:
[local]host_name(config)#
Syntax
sccp-network sccp_net_id [ -noconfirm ]
no sccp-network sccp_net_id
no
Remove the SCCP network configuration with the specified index number from the system configuration.
sccp_net_id
This number identifies a specific SCCP network configuration.
sccp_net_id:
must be an integer from 1 through 12.
-noconfirm
Indicates that the command is to execute without any additional prompt and confirmation from the user.
Usage
Use this command to create or modify an SCCP network and enter the SCCP network configuration mode.
The SCCP network is not a standard SS7 or UMTS concept - this concept is specific to this platform.
For details about the commands and parameters needed to create and edit the SCCP Network configuration,
check the SCCP Network Configuration Mode chapter.
The SCCP network is not a standard SS7 or UMTS concept - this concept is specific to this platform.
For details about the commands and parameters needed to create and edit the SCCP Network configuration,
check the SCCP Network Configuration Mode chapter.
Example
The following command creates an SCCP network with the index number of
1
:
sccp-network 1
The following command creates an SCCP network with the index number of
2
to associate with HNB-GW
service for HNB access network users without any prompt.: