Cisco Cisco Packet Data Interworking Function (PDIF)
Global Configuration Mode Commands (L-S)
▀ snmp heartbeat
▄ Command Line Interface Reference, StarOS Release 16
5398
snmp heartbeat
Enables the sending of periodic “heartbeat” notifications (traps).
Product
All
Privilege
Administrator
Mode
Exec > Global Configuration
configure
Entering the above command sequence results in the following prompt:
[local]host_name(config)#
Syntax
snmp heartbeat { interval [ minutes ] | second-interval [ seconds ] }
[ deafult | no ] snmp heartbeat
default
Returns the command to its default setting of disabled.
no
Disables the feature.
interval [ minutes ]
Default: 60
Specifies the interval time (in minutes) between notifications.
Specifies the interval time (in minutes) between notifications.
minutes
must be an integer from 1 through
1440.
second-interval [ seconds ]
Default: 30
Specifies the secondary interval time, in seconds, between notifications.
Specifies the secondary interval time, in seconds, between notifications.
seconds
must be an integer from 10
through 50.
Usage
Use this command to enable the sending of a heartbeat notification periodically to confirm a system is up and
communicating.
communicating.
Example
The following command sets the SNMP heartbeat notification interval to 2 hours, 15 minutes and 30 seconds:
snmp heartbeat interval 135 second-interval 30