Cisco Cisco Packet Data Interworking Function (PDIF)
Global Configuration Mode Commands (L-S)
system ▀
Command Line Interface Reference, StarOS Release 16 ▄
5419
system
Configures system information which is accessible via SNMP.
Product
All
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration
configure
Entering the above command sequence results in the following prompt:
[local]host_name(config)#
Syntax
system { carrier-id mcc mcc_id mnc mnc_id | contact who | description string | hostname
host_name | location text | serial-number ser_number | sysdesc-sysoid-style [ default |
new ] }
host_name | location text | serial-number ser_number | sysdesc-sysoid-style [ default |
new ] }
default system { contact | location }
default
Removes the configured
system contact
and
system location
form the system.
carrier-id
mcc
mcc_id
mnc
mnc_id
Important:
This carrier ID is not used by the GGSN.
Specifies a carrier-id that is a unique identifier for the carrier that has installed the system. When the carrier
ID values are set, the carrier-id and gmt_offset attributes are included in access-request and accounting
packets when using the following RADIUS dictionaries:
ID values are set, the carrier-id and gmt_offset attributes are included in access-request and accounting
packets when using the following RADIUS dictionaries:
3gpp2
3gpp2-835
starent
starent-835
starent-vsa1
starent-vsa1-835
custom9
mcc
mcc_id
: The mobile country code. This must be specified as a 3-digit string from 001 through 999.
mnc
mnc_id
: The mobile network code. This must be specified as a 2- or 3-digit string from 01 through 999.
contact
who
Default: No contact specified.