Cisco Cisco Packet Data Interworking Function (PDIF)
Global Configuration Mode Commands (T-threshold phspc)
threshold aaa-acct-failure-rate ▀
Command Line Interface Reference, StarOS Release 16 ▄
5447
threshold aaa-acct-failure-rate
Configures accounting failure rate, alarm or alert thresholds for the system.
Product
PDSN
GGSN
HA
ASN-GW
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration
configure
Entering the above command sequence results in the following prompt:
[local]host_name(config)#
Syntax
threshold aaa-acct-failure-rate high_thresh [ clear low_thresh ]
default threshold aaa-acct-failure-rate
high_thresh
Default: 1
Specifies the high threshold percent of accounting failures that must be met or exceeded within the polling
interval to generate an alert or alarm.
Specifies the high threshold percent of accounting failures that must be met or exceeded within the polling
interval to generate an alert or alarm.
high_thresh
is an integer from 0 and 100.
clear
low_thresh
Default: 1
Specifies the low threshold percent of accounting failures that maintains a previously generated alarm
condition. If the percentage of failures falls beneath the low threshold within the polling interval, a clear
alarm will be generated.
Specifies the low threshold percent of accounting failures that maintains a previously generated alarm
condition. If the percentage of failures falls beneath the low threshold within the polling interval, a clear
alarm will be generated.
low_thresh
is an integer from 0 through 100.
Important:
This value is ignored for the Alert model. In addition, if this value is not configured for the Alarm
model, the system assumes it is identical to the high threshold.
Usage
Accounting failure rate thresholds generate alerts or alarms based on the percentage of AAA accounting
message requests that failed during the specified polling interval. Accounting requests are counted for all
AAA accounting servers that the system is configured to communicate with.
Alerts or alarms are triggered for accounting failure rates based on the following rules:
message requests that failed during the specified polling interval. Accounting requests are counted for all
AAA accounting servers that the system is configured to communicate with.
Alerts or alarms are triggered for accounting failure rates based on the following rules:
Enter condition: Actual failure percentage is greater than or equal to the high threshold.
Clear condition: Actual failure percentage is less than the low threshold.