Cisco Cisco Packet Data Interworking Function (PDIF)
Global Configuration Mode Commands (threshold poll commands A - N)
▀ threshold poll dcca-unknown-rating-group interval
▄ Command Line Interface Reference, StarOS Release 16
5670
threshold poll dcca-unknown-rating-group interval
Configures the polling interval for Diameter Credit-Control Application (DCCA) Unknown Rating Group threshold.
Product
ACS
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration
configure
Entering the above command sequence results in the following prompt:
[local]host_name(config)#
Syntax
threshold poll dcca-unknown-rating-group interval duration
default threshold poll dcca-unknown-rating-group interval
default
Uses the default polling interval.
Default: 900 seconds
Default: 900 seconds
interval duration
Specifies the polling interval (in seconds) for the DCCA Unknown Rating Group threshold.
duration
must be an integer from 60 through 60000.
Usage
This command configures the polling interval for DCCA Unknown Rating Group threshold.
Important:
All configured polling intervals are rounded up to the closest multiple of 30. For example, if a
polling interval is configured for 130 seconds, the system uses a polling interval of 150 seconds.
Refer to the
threshold monitoring
and other threshold commands for additional information on the
system’s support for thresholding in this chapter.
Important:
To enable an SNMP trap for monitoring this threshold use the
snmp trap enable
ThreshDCCAUnknownRatingGroup
command in this mode.
Example
The following command configures the polling interval to
600
seconds to threshold for the unknown DCCA
Rating Group (content-id) returned by Diameter to system:
threshold poll dcca-unknown-rating-group interval 600