Cisco Cisco Packet Data Interworking Function (PDIF)
Global Configuration Mode Commands (threshold ppp - url-blacklisting)
▀ threshold sess-flow-count
▄ Command Line Interface Reference, StarOS Release 16
5802
threshold sess-flow-count
Configures alarm or alert thresholds for the percentage of session manager flow count.
Product
All
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration
configure
Entering the above command sequence results in the following prompt:
[local]host_name(config)#
Syntax
threshold sess-flow-count flow_count_thresh [ clear clear_thresh ]
flow_count_percent
Default: 90
Specifies the high threshold rate percentage for session manager flow count to generate an alert or alarm.
Specifies the high threshold rate percentage for session manager flow count to generate an alert or alarm.
flow_count_thresh
is an integer from 1 through 100.
clear clear_thresh
Specifies the low threshold rate percentage for session manager flow count. If the number of session manager
flow count falls beneath the low threshold, a clear alarm will be generated.
flow count falls beneath the low threshold, a clear alarm will be generated.
clear_thresh
is an integer from 1 through 100. The value chosen for the
clear_thresh
must always be
lesser than the
flow_count_thresh
.
Usage
Use this command to configure thresholds for monitoring the session flow count.
Refer to the
Refer to the
threshold poll
command to configure the polling interval and the
threshold monitoring
command to enable thresholding for this value.
Example
The following command configures a session flow count high threshold of
50
percent and a clear threshold of
45
percent:
threshold sess-flow-count 50 clear 45