Cisco Cisco Packet Data Interworking Function (PDIF)
Global Configuration Mode Commands (threshold ppp - url-blacklisting)
threshold total-lma-sessions ▀
Command Line Interface Reference, StarOS Release 16 ▄
5831
threshold total-lma-sessions
Configures alarm or alert thresholds for the total number of Local Mobility Anchor (LMA) sessions across all services
in the system.
in the system.
Product
P-GW
SAEGW
Privilege
Administrator
Mode
Exec > Global Configuration
configure
Entering the above command sequence results in the following prompt:
[local]host_name(config)#
Syntax
threshold total-lma-sessions high_thresh [ clear low_thresh ]
high_thresh
Default: 0
Specifies the high threshold number of LMA sessions for all LMA services that must be met or exceeded
within the polling interval to generate an alert or alarm.
Specifies the high threshold number of LMA sessions for all LMA services that must be met or exceeded
within the polling interval to generate an alert or alarm.
high_thresh
is an integer from 1 through 1500000. A value of 0 disables the threshold.
clear
low_thresh
Default: 0
Specifies the low threshold number of LMA sessions for all LMA services that maintains a previously
generated alarm condition. If the number of sessions falls beneath the low threshold within the polling
interval, a clear alarm will be generated.
Specifies the low threshold number of LMA sessions for all LMA services that maintains a previously
generated alarm condition. If the number of sessions falls beneath the low threshold within the polling
interval, a clear alarm will be generated.
low_thresh
is an integer from 0 through 1500000. A value of 0 disables the threshold.
Important:
This value is ignored for the Alert model. In addition, if this value is not configured for the Alarm
model, the system assumes it is identical to the high threshold.
Usage
Monitor and set alarms or alerts when the total number of LMA sessions in the system is equal to or greater
than the set limit.
Alerts or alarms are triggered for LMA sessions based on the following rules:
than the set limit.
Alerts or alarms are triggered for LMA sessions based on the following rules:
Enter condition: Actual total number of LMA sessions is greater than or equal to the high threshold.
Clear condition: Actual total number of LMA sessions is less than the low threshold.
If a trigger condition occurs within the polling interval, the alert or alarm will not be generated until the end
of the polling interval.
of the polling interval.