Cisco Cisco Packet Data Interworking Function (PDIF)
GPRS Service Configuration Mode Commands
▀ associate-service
▄ Command Line Interface Reference, StarOS Release 16
5872
associate-service
Identifies services to be associated with the GPRS Service.
Important:
This command is used only in Releases 12.0 and 12.2. For Release 14.0 refer to the
associate
command.
Important:
This command can be used before the associated service instance is created and configured but care
should be used to match the service names.
Product
SGSN
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > Context Configuration > GPRS Service Configuration
configure > context context_name > gprs-service service_name
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-gprs-service)#
Syntax
[ no ] associate-service { gs name | map name | sgtp name } [ context ctxt_name ]
no
Removes the service association definition from the configuration.
gs name
Specifies the Gs service configuration to associate with this GPRS service.
name
must be a string of 1 to 63 alphanumeric characters with no spaces.
map name
Specifies the MAP service configuration to associate with this GPRS service.
name
must be a string of 1 to 63 alphanumeric characters with no spaces.
sgtp name
Specifies the SGTP service configuration to associate with this GPRS service.
name
must be a string of 1 to 63 alpha numeric characters with no spaces.
context ctxt_name
Defines the context in which the service was created.
ctxt_name
must be a string of 1 to 63 alphanumeric characters with no spaces.