Cisco Cisco Packet Data Interworking Function (PDIF)
HeNB-GW Network Service Configuration Mode Commands
s1ap-max-retransmissions ▀
Command Line Interface Reference, StarOS Release 16 ▄
6157
s1ap-max-retransmissions
This command configures the number of times node level S1AP message is retransmitted towards MME.
Product
HeNB-GW
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > Context Configuration > HENBGW-NETWORK Service Configuration
configure > context
context_name
> henbgw-network-service
service_name
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-henbgw-network-service)#
Syntax
s1ap-max-retransmissionsnumber_of_retries
default s1ap-max-retransmissions
default
Configures the default number of S1AP retransmissions for this HeNB-GW Network service configuration.
Default number of retransmissions is 4.
Default number of retransmissions is 4.
number_of_retries
Identifies the number of S1AP retransmissions to be configured. This number must be entered as an integer
between 1 and 5.
between 1 and 5.
Usage
Use this command to configure the maximum number of Node level S1AP retransmissions for this HeNB-
GW Network service.
GW Network service.
Caution:
Configuring s1ap-max-retransmissions to 0 will disable the S1AP retransmission support.
Example
Following command configures default (which is also 4) S1AP retransmission on a specific HeNB-GW
Network service.
Network service.
default s1ap-max-retransmissions