Cisco Cisco Packet Data Interworking Function (PDIF)
HNB-GW Service Configuration Mode Commands
▀ hnb-access-mode mismatch-action
▄ Command Line Interface Reference, StarOS Release 16
6266
hnb-access-mode mismatch-action
Configures the HNB-GW service instance to manage the access-mode where a mismatch in the access-mode sent by a
HNB in the Registration Request message and the access-mode sent by the AAA in the Access-Accept message is
found.
HNB in the Registration Request message and the access-mode sent by the AAA in the Access-Accept message is
found.
Platform
ASR 5000
ASR 5500
Product
HNB-GW
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > Context Configuration > HNB-GW Service Configuration
configure > context context_name > hnbgw-service service_name
Entering the above command sequence results in the following prompt:
[local]host_name(config-hnbgw-service)#
Syntax
hnb-access-mode mismatch-action { accept-aaa-value | hnb-reg-rej }
default hnb-access-mode mismatch-action
default
Sets the default action of a HNB-GW service instance to manage the access-mode where a mismatch in the
access-mode sent by a HNB in the Registration Request message and the access-mode sent by the AAA in
the Access-Accept message is found.
By default, HNB-GW rejects the HNB registration and sends the HNB-Registration-Reject message to the
HNB.
access-mode sent by a HNB in the Registration Request message and the access-mode sent by the AAA in
the Access-Accept message is found.
By default, HNB-GW rejects the HNB registration and sends the HNB-Registration-Reject message to the
HNB.
accept-aaa-value
Sets the HNB-GW service instance to accept the HNB registration where a mismatch in the access-mode sent
by a HNB in the Registration Request message and the access-mode sent by the AAA in the Access-Accept
message is found.
In this configuration HNBGW registers the HNB with the access-mode value sent by the AAA.
by a HNB in the Registration Request message and the access-mode sent by the AAA in the Access-Accept
message is found.
In this configuration HNBGW registers the HNB with the access-mode value sent by the AAA.
reject-hnb-reg
Sets the HNB-GW service instance to reject the HNB registration where a mismatch in the access-mode sent
by a HNB in the Registration Request message and the access-mode sent by the AAA in the Access-Accept
message is found.
In this mode, after rejecting the HNB registration, the HNB-GW sends the HNB-Registration-Reject
message to the HNB.
by a HNB in the Registration Request message and the access-mode sent by the AAA in the Access-Accept
message is found.
In this mode, after rejecting the HNB registration, the HNB-GW sends the HNB-Registration-Reject
message to the HNB.