Cisco Cisco Packet Data Interworking Function (PDIF)
HSS Peer Service Configuration Mode Commands
diameter hss-endpoint ▀
Command Line Interface Reference, StarOS Release 16 ▄
6337
diameter hss-endpoint
Associates a preconfigured Diameter origin endpoint with this HSS peer service.
Product
MME
SGSN
Privilege
Administrator
Mode
Exec > Global Configuration > Context Configuration > HSS Peer Service Configuration
configure > context context_name > hss-peer-service service_name
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-hss-peer-service)#
Syntax
diameter hss-endpoint endpoint_name [ eir-endpoint eir_endpoint_name ] [ auc-endpoint
auc_endpoint_name ]
auc_endpoint_name ]
no diameter hss-endpoint
no
Removes previously associated Diameter origin endpoint from this HSS peer service.
endpoint_name
Identifies a preconfigured Diameter endpoint specific to the HSS interface. The endpoint must be present in
all Diameter messages and is the endpoint that originates the diameter message.
all Diameter messages and is the endpoint that originates the diameter message.
endpoint_name
is a preconfigured Diameter endpoint name expressed as an alphanumeric string of 1
through 63 characters.
eir-endpoint eir_endpoint_name
Identifies a preconfigured Diameter endpoint specific to the S13 or S13‘ Equipment Identity Register (EIR)
interface.
interface.
eir_endpoint_name
must be an existing Diameter endpoint expressed as an alphanumeric string of 1
through 63 characters.
Usage
Use this command to associated a Diameter origin endpoint to create a Diameter-based S6a or S6d (SGSN)
interface association in this HSS peer service to provide AAA functionality to the EPS bearer context.
Optionally, use this command to associate a Diameter origin endpoint to create a Diameter-based S13 or S13‘
(SGSN) interface association in this HSS peer service to provide IMEI query capability between the MME
and an EIR.
interface association in this HSS peer service to provide AAA functionality to the EPS bearer context.
Optionally, use this command to associate a Diameter origin endpoint to create a Diameter-based S13 or S13‘
(SGSN) interface association in this HSS peer service to provide IMEI query capability between the MME
and an EIR.