Cisco Cisco Packet Data Interworking Function (PDIF)
IP VRF Context Configuration Mode Commands
▀ mpls map-dscp-to-exp
▄ Command Line Interface Reference, StarOS Release 16
6418
mpls map-dscp-to-exp
This command maps the final differentiated services code point (DSCP) bit value in the IP packet header to the final
Experimental (EXP) bit value in the MPLS header for incoming traffic.
Experimental (EXP) bit value in the MPLS header for incoming traffic.
Important:
This command has been deprecated beginning with Release 15.0.
Product
GGSN
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > Context Configuration > IP VRF Context Configuration
configure > context context_name > ip vrf vrf_name
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-context-vrf)#
Syntax
[ no ] mpls map-dscp-to-exp dscp dscp_bit_value exp exp_bit_value
no
Disables the configured DSCP bit value mapping to the EXP bit value from a specific IP VRF context.
dscp
dscp_bit_value
Specifies the final DSCP bit value which is to map with the final EXP bit value in MPLS header for incoming
traffic.
traffic.
dscp_bit_value
specifies the value of DSCP bit values separated in eight groups and represented with
integers from 0 through 7.
The default representation of DSCP value in eight groups is given in the following table:
The default representation of DSCP value in eight groups is given in the following table:
DSCP Marking Value
DSCP Map Group
0-7
0
8-15
1
16-23
2
24-31
3
32-39
4
40-47
5
48-55
6
56-63
7