Cisco Cisco Packet Data Interworking Function (PDIF)
IPSG RADIUS Snoop Configuration Mode Commands
▀ profile
▄ Command Line Interface Reference, StarOS Release 16
6482
profile
This command allows you to configure the service to use APN or subscriber profile.
Product
IPSG
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > Context Configuration > IPSG RADIUS Snoop Configuration
configure > context context_name > ipsg-service service_name mode radius-snoop
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-ipsg-service-radius-snoop)#
Syntax
profile { APN | subscriber }
default profile
default
Configures this command with its default setting.
APN
Specifies the service to support APN configuration required to enable Gx support.
subscriber
Specifies the service to support subscriber profile lookup.
Usage
Use this command to set the service to support APN profiles (supporting Gx through the enabling of
ims-
auth-service
) or for basic subscriber profile lookup.
Example
The following command specifies to use the subscriber profile:
profile subscriber