Cisco Cisco Packet Data Interworking Function (PDIF)
IPv6 ACL Configuration Mode Commands
▀ redirect css service (for downlink, by ICMP packets)
▄ Command Line Interface Reference, StarOS Release 16
6562
redirect css service (for downlink, by ICMP packets)
Used to redirect subscriber sessions based on the internet control message protocol packets in the downlink (from the
Mobile Node) direction.
Mobile Node) direction.
Product
All
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > Context Configuration > IPv6 ACL Configuration
configure > context context_name > ipv6 access-list ipv6_acl_name
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-ipv6-acl)#
Syntax
redirect css service svc_name [ log ] downlink icmp { any | host source_host_address |
source_address source_wildcard } { any | host dest_host_address | dest_address
dest_wildcard } [ icmp_type [ icmp_code ] ]
source_address source_wildcard } { any | host dest_host_address | dest_address
dest_wildcard } [ icmp_type [ icmp_code ] ]
after redirect css service svc_name [ log ] downlink icmp { any | host
source_host_address | source_address source_wildcard } { any | host dest_host_address |
dest_address dest_wildcard } [ icmp_type [ icmp_code ] ]
source_host_address | source_address source_wildcard } { any | host dest_host_address |
dest_address dest_wildcard } [ icmp_type [ icmp_code ] ]
before redirect css service svc_name [ log ] downlink icmp { any | host
source_host_address | source_address source_wildcard } { any | host dest_host_address |
dest_address dest_wildcard } [ icmp_type [ icmp_code ] ]
source_host_address | source_address source_wildcard } { any | host dest_host_address |
dest_address dest_wildcard } [ icmp_type [ icmp_code ] ]
no redirect css service svc_name [ log ] downlink icmp { any | host source_host_address |
source_address source_wildcard } { any | host dest_host_address | dest_address
dest_wildcard } [ icmp_type [ icmp_code ] ]
source_address source_wildcard } { any | host dest_host_address | dest_address
dest_wildcard } [ icmp_type [ icmp_code ] ]
after
Indicates all rule definitions subsequent to this command are to be inserted after the command identified by
the exact options listed.
This moves the insertion point to be immediately after the rule definition which matches the exact options
specified such that new rule definitions will be added, in order, after the matching rule definition.
the exact options listed.
This moves the insertion point to be immediately after the rule definition which matches the exact options
specified such that new rule definitions will be added, in order, after the matching rule definition.
Important:
If the options specified do not exactly match an existing rule definition, the insertion point does not
change.
before
Indicates all rule definitions subsequent to this command are to be inserted before the command identified by
the exact options listed.
This moves the insertion point to be immediately before the rule definition which matches the exact options
specified such that new rule definitions will be added, in order, before the matching rule definition.
the exact options listed.
This moves the insertion point to be immediately before the rule definition which matches the exact options
specified such that new rule definitions will be added, in order, before the matching rule definition.