Cisco Cisco Packet Data Interworking Function (PDIF)
Link Configuration Mode Commands
▀ timeout
▄ Command Line Interface Reference, StarOS Release 16
6736
timeout
This command enables configuration of an array of signaling and flow control timers - for MTP, SSCF, and SSCOP.
Product
SGSN
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > SS7 Routing Domain Configuration > Linkset Configuration > Link Configuration
configure > ss7-routing-domain domain_id variant var_type > linkset id linkset_id > link
id link_id
id link_id
Entering the above command sequence results in the following prompt:
[local]host_name(config-ss7-rd-linkset-linkset_id-link-link_id)#
Syntax
[ no ] timeout timer timer_value
no
Adding
no
to the
timeout
command removes the timer configuration.
timer timer_value
Select the timer and enter a value from the range.
For timers having different ranges for highspeed and lowspeed links or for different variants, the appropriate
ranges will be displayed based on the link-type configured.
For timers having different ranges for highspeed and lowspeed links or for different variants, the appropriate
ranges will be displayed based on the link-type configured.
Important:
Currently, the China variant uses ITU values.
Timer
Link Type & Variant
Range of Times
Granularity = 100ms
Granularity = 100ms
Default Time
mtp2-tmr-t1
Alignment ready timer
Alignment ready timer
Highspeed; ITU
160..3500 (16 - 350
seconds)
seconds)
3000 (300
seconds)
seconds)
Lowspeed; ITU
120 - 500 (12 - 50
seconds)
seconds)
400 (40 seconds)
Highspeed; ANSI
160 - 3500 (16 to 350
seconds)
seconds)
1700 (170
seconds)
seconds)
Lowspeed; ANSI
120 - 500 (12 - 50
seconds)
seconds)
130 (13 seconds)
mtp2-tmr-t2
Not aligned timer
Not aligned timer
Highspeed; ITU
50 - 1500 (5 - 150
seconds)
seconds)
50 (5 seconds)
Lowspeed; ITU
50 - 150 (5 - 15
seconds)
seconds)
50 (5 seconds)