Cisco Cisco Packet Data Interworking Function (PDIF)
LMA Service Configuration Mode Commands
▀ reg-lifetime
▄ Command Line Interface Reference, StarOS Release 16
6760
reg-lifetime
Configures the Mobile IPv6 session registration lifetime for this service.
Product
P-GW
SAEGW
Privilege
Administrator
Syntax
reg-lifetime seconds
default reg-lifetime
default
Resets the command value to the default setting of 600.
seconds
Default: 600
Sets the time value for session lifetimes for this service.
Sets the time value for session lifetimes for this service.
seconds
must be an integer value from1 to 262140.
Usage
Use this command to limit PMIPv6 lifetime on this service. If the PBU contains a lifetime shorter than what
is specified, it is granted. If the lifetime is longer, then HA service will limit the granted lifetime to the
configured value.
is specified, it is granted. If the lifetime is longer, then HA service will limit the granted lifetime to the
configured value.
Important:
Refer to the refresh-interval-percent and refresh-advice-option commands for a complete
understanding of registration (binding) lifetimes and refresh intervals.
Example
The following command sets the registration lifetime for Mobile IPv6 sessions using this service to
1200
seconds (20 minutes):
reg-lifetime 1200