Cisco Cisco Packet Data Interworking Function (PDIF)
LNS Service Configuration Mode Commands
▀ tunnel-switching
▄ Command Line Interface Reference, StarOS Release 16
6802
tunnel-switching
Enables or disables the LNS service from creating tunnels to another LAC for an existing tunnel.
Product
PDSN
GGSN
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > Context Configuration > LNS Service Configuration
configure > context context_name > lns-service service_name
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-lns-service)#
Syntax
[ no ] tunnel-switching
no
Disable tunnel switching.
Tunnel switching is enabled by default.
Tunnel switching is enabled by default.
Usage
Tunnel switching is when the LNS has a tunnel connected to a LAC and creates a tunnel to a different LAC
and routes the data from the original LAC through the new tunnel to the other LAC.
and routes the data from the original LAC through the new tunnel to the other LAC.
Example
To disable tunnel switching in the LNS, enter the following command;
no tunnel-switching