Cisco Cisco Packet Data Interworking Function (PDIF)
Logical eNode Configuration Mode Commands
▀ associate mme-pool
▄ Command Line Interface Reference, StarOS Release 16
6844
associate mme-pool
Associates a previously configured MME pool to this logical eNodeB. An MME pool must be configured in LTE Policy
Configuration mode before using this configuration.
Configuration mode before using this configuration.
Product
HeNB-GW
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > Context Configuration > HENBGW-NETWORK Service Configuration > Logical
eNodeB Configuration
eNodeB Configuration
configure > context
context_name
> henbgw-network-service
service_name
> logical-enb
global-enb-id plmn id mcc
mcc_id
mnc
mnc_id
{
home-enb-id
henb_id | macro-enb-id
menb_id
}
Entering the above command sequence results in the following prompt:
[context_name]host_name(logical-enb)#
Syntax
associate mme-pool pool_name
no associate mme-pool
no
Removes the associated MME pool from this logical eNodeB configuration.
pool_name
Identifies the name of the pre-configured MME pool to associate with this logical eNodeB.
pool_name
is an alphanumeric string of 1 through 63 characters.
Usage
Use this command to bind/associate a pre-configured MME pool to the this logical eNodeB. The MME pool
can be configured in LTE Policy configuration mode. The associate configuration is used to establish
associations with other helper services in general.
Each logical eNodeB can connect up to 8 MMEs. Since 8 logical eNodeBs can be configured per HeNB-GW
Network service, a total of 64 associations can be established between HeNB-GW and MME.
can be configured in LTE Policy configuration mode. The associate configuration is used to establish
associations with other helper services in general.
Each logical eNodeB can connect up to 8 MMEs. Since 8 logical eNodeBs can be configured per HeNB-GW
Network service, a total of 64 associations can be established between HeNB-GW and MME.
Example
Following command associates an MME pool named
mme_pool
with specific logical eNodeB:
associate mme-pool mme_pool