Cisco Cisco Packet Data Interworking Function (PDIF)
LTE Policy Configuration Mode Commands
▀ ho-restrict-list
▄ Command Line Interface Reference, StarOS Release 16
6940
ho-restrict-list
Creates a handover (HO) restriction list or specifies an existing HO restriction list and enters the Handover Restriction
List Configuration Mode.
List Configuration Mode.
Product
MME
ePDG
SAEGW
S-GW
Privilege
Administrator
Mode
Exec > Global Configuration > LTE Policy Configuration
configure > lte-policy
Entering the above command sequence results in the following prompt:
[local]host_name(lte-policy)#
Syntax
[ no ] ho-restrict-list list_name [ -noconfirm ]
no
Removes the specified restriction list from the system.
-noconfirm
Executes the command without any additional prompt and confirmation from the user.
list_name
Specifies the name of the HO restriction list. If the entered list name does not refer to an existing list, a new
list is created.
list is created.
list_name
is an alphanumeric string of 1 through 64 characters.
Usage
Use this command to enter the Handover Restriction List Configuration Mode for an existing list or for a
newly defined list. This command is also used to remove an existing list.
Entering this command results in the following prompt:
newly defined list. This command is also used to remove an existing list.
Entering this command results in the following prompt:
[context_name]hostname(ho-restrict-list)#
Handover Restriction List Configuration Mode commands are defined in the LTE Handover Restriction List
Configuration Mode Commands chapter.
Configuration Mode Commands chapter.
Example
The following command enters the Handover Restriction List Configuration Mode for a new or existing list
named
named
ho_restricit_list1
: