Cisco Cisco Packet Data Interworking Function (PDIF)
MAG Service Configuration Mode Commands
information-element-set ▀
Command Line Interface Reference, StarOS Release 16 ▄
6997
information-element-set
Identifies the information element set of mobility options to be used in Proxy Binding Update (PBU) messages sent by
the MAG to the LMA.
the MAG to the LMA.
Product
HSGW
S-GW
Privilege
Administrator
Mode
Exec > Global Configuration > Context Configuration > MAG Service Configuration
configure > context context_name > mag-service service_name
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-mag-service)#
Syntax
information-element-set { custom1 | custom2 | standard }
default information-element-set
default
Resets the command to the default value of “standard”.
{ custom1 | standard }
custom1
: Specifies that a custom set of mobility options will be used in proxy binding update messages that
are sent in Vendor Specific Mobility Options. These options are:
User Location Info
Hardware Identifier
Access Network Charging Identifier
custom2
: Specifies that a custom set of mobility options will be used in proxy binding update messages that
are sent in Vendor Specific Mobility Options. When enabled, BSID will be sent in S2a PMIPv6 message.
custom3
: Specifies that a custom set of mobility options will be used in proxy binding update messages that
are sent in Vendor Specific Mobility Options.
standard
: Specifies that a standard set of mobility options are to be used in proxy binding update messages.
3GPP specification 29.275 defines these as Protocol Configuration Options.
Usage
Use this command to identify the type of information element set of mobility options to be used in PBU
messages sent form the MAG to the LMA. The mobility options can be either standards-based (3GPP 29.275)
or custom (vendor-specific as defined by 3GPP 29.275).
messages sent form the MAG to the LMA. The mobility options can be either standards-based (3GPP 29.275)
or custom (vendor-specific as defined by 3GPP 29.275).
Example
The following command identifies the information element set of mobility options to use in PBU messages as
custom:
custom: