Cisco Cisco Packet Data Interworking Function (PDIF)
MME Service Configuration Mode Commands
▀ policy s1-reset
▄ Command Line Interface Reference, StarOS Release 16
7160
policy s1-reset
Configures how the MME responds to an S1 interface reset.
Product
MME
Privilege
Administrator
Mode
Exec > Global Configuration > Context Configuration > MME Service
configure > context context_name > mme-service service_name
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-mme-service)#
Syntax
policy s1-reset { detach-ue | idle-mode-entry }
default policy s1-reset
default
Returns the command to its default setting of
idle-mode-entry
.
{ detach-ue | idle-mode-entry }
Specifies the action to perform when the S1 interface is reset.
detach-ue
: Specifies that UEs are to be implicitly detached from the service upon S1 interface reset.
idle-mode-entry
: Specifies that UEs are to be placed into an idle mode condition during S1 interface
reset.
Usage
Use this command to configure how the MME reacts to an S1 interface reset condition.
Example
The following command configures the MME to place UEs into an idle state while the S1 interface is being
reset:
reset:
s1-reset idle-mode-entry