Cisco Cisco Packet Data Interworking Function (PDIF)
MME Service Configuration Mode Commands
s1-ue-context-release ▀
Command Line Interface Reference, StarOS Release 16 ▄
7171
s1-ue-context-release
Specifies the cause code to be sent in a UE-CONTEXT-RELEASE message initiated by the MME upon the reception of
TAU in some situations.
TAU in some situations.
Product
MME
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > Context Configuration > MME Service
configure > context context_name > mme-service service_name
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-mme-service)#
Syntax
s1-ue-context-release reason init-ue-from-enodeb-for-tau cause type { nas value nas_value
| radio value radio_value }
| radio value radio_value }
default s1-ue-context-release reason init-ue-from-enodeb-for-tau cause
default
Resets the MME Service configuration to the system defaults.
nas value nas_value
nas_value
must be an integer from 0 to 4.
0 - Normal Release (default value)
1 - Authentication Failure
2 - Detach
3 - Unspecified
4 - CSG Subscription Expiry
radio value radio_value
radio_value
must be an integer from 0 to 38.
0 - Unspecified
1 - TX2RELOCOverall Expiry
2 - Successful Handover
3 - Release due to E-UTRAN Generated Reason
4 - Handover Cancelled
5 - Partial Handover