Cisco Cisco Packet Data Interworking Function (PDIF)
Network Service Entity- IP Local Configuration Mode Commands
associate ▀
Command Line Interface Reference, StarOS Release 16 ▄
7239
associate
This command supports the association of DSCP template at network-service-entity ip local level.
Product
SGSN
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > Network Service Entity - IP Configuration
configure > network-service-entity ip-local
Entering the above command sequence results in the following prompt:
[local]host_name(nse-ip-local)#
Syntax
associate dscp-template downlink [<template-name>]
no associate dscp-template downlink
no
Removes the associate services needed for all IP nses.
dscp-template
Configures DCSP for all IP nses.
downlink [<template-name>]
Specifies the DSCP template used for the downlink packets.
template-name:
String of size 1 up to 64.
Usage
Configuring this command allows the SGSN to send the configured DSCP value to:
All the GPRS nodal messages.
All the subscriber specific messages, when dscp template association at gprs-service level and nsei level
are absent.
The DSCP template can be defined in sgsn global.
By default, SGSN will apply best effort DSCP value ( that is, “0” ).
Note:
By default, SGSN will apply best effort DSCP value ( that is, “0” ).
Note:
Atleast one nsvl should be configured, before configuring the DSCP marking at “network-service-entity
ip-local” level.
After the removal of last nsvl, DSCP template association is removed from “network-service-entity ip-
local".
Example