Cisco Cisco Packet Data Interworking Function (PDIF)
Network Service Entity- IP Local Configuration Mode Commands
ns-timer ▀
Command Line Interface Reference, StarOS Release 16 ▄
7245
ns-timer
This command sets the network service (NS) counters for the SNS procedure and testing.
Product
SGSN
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > Network Service Entity - IP Configuration
configure > network-service-entity ip-local
Entering the above command sequence results in the following prompt:
[local]host_name(nse-ip-local)#
Syntax
ns-timer { sns-guard timeout_val | sns-prov timeout_val | test timeout_val }
default ns-timer { sns-guard | sns-prov | test }
default
Resets the selected timer configuration to its default value.
sns-guard timeout_val
Sets the SNS-guard timer which is used in the auto-learn procedure to clean-up learnt BSC/NSE informtation.
Timeout value is in seconds.
Timeout value is in seconds.
timeout_val:
Enter an integer from 1 to 300. Default is 60.
sns-prov timeout_val
Sets the SNS procedure timeout value in seconds.
timeout_val:
Enter an integer from 1 to 10. Default is 5.
test timeout_val
Sets the test procedure timeout value in seconds.
timeout_val:
Enter an integer from 1 to 60. Default is 30 seconds.
Usage
Set NS timers to help manage the NSE-IP connection.
Example
The following example sets the test timer to 4 seconds:
ns-timer test 4