Cisco Cisco Packet Data Interworking Function (PDIF)
ORBEM Configuration Mode Commands
iop-address ▀
Command Line Interface Reference, StarOS Release 16 ▄
7299
iop-address
Sets the IP address used by the ORBEM Server to advertise service.
Product
All
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > ORBEM Configuration
configure > orbem
Entering the above command sequence results in the following prompt:
[local]host_name(config-orbem)#
Syntax
iop-address ip_address
ip_address
Specifies the IP address to use for inter-ORB communications for the current context.
ip_address
must be
specified using IPv4 dotted-decimal notation.
Usage
Change the inter-ORB IP address when the IP address of the current context should not be used. The IP
address of the local context may not be appropriate when the ORB configuration across nodes would cause
conflicts with the IP addresses.
The default inter-ORB IP address is the IP address of the current context.
address of the local context may not be appropriate when the ORB configuration across nodes would cause
conflicts with the IP addresses.
The default inter-ORB IP address is the IP address of the current context.
Example
iop-address 10.2.3.4